Loss mechanisms of surface plasmon polaritons on gold probed by cathodoluminescence imaging spectroscopy

We use cathodoluminescence imaging spectroscopy to excite surface plasmon polaritons and measure their decay length on single crystal and polycrystalline gold surfaces. The surface plasmon polaritons are excited on the gold surface by a nanoscale focused electron beam and are coupled into free space radiation by gratings fabricated into the surface. By scanning the electron beam on a line perpendicular to the gratings, the propagation length is determined. Data for single-crystal gold are in agreement with calculations based on dielectric constants. For polycrystalline films, grain boundary scattering is identified as additional loss mechanism, with a scattering coefficient SG=0.2%

High quality ultrafast transmission electron microscopy using resonant microwave cavities

Ultrashort, low-emittance electron pulses can be created at a high repetition rate by using a TM$_{110}$ deflection cavity to sweep a continuous beam across an aperture. These pulses can be used for time-resolved electron microscopy with atomic spatial and temporal resolution at relatively large average currents. In order to demonstrate this, a cavity has been inserted in a transmission electron microscope, and picosecond pulses have been created. No significant increase of either emittance or energy spread has been measured for these pulses. At a peak current of $814\pm2$ pA, the root-mean-square transverse normalized emittance of the electron pulses is $\varepsilon_{n,x}=(2.7\pm0.1)\cdot 10^{-12}$ m rad in the direction parallel to the streak of the cavity, and $\varepsilon_{n,y}=(2.5\pm0.1)\cdot 10^{-12}$ m rad in the perpendicular direction for pulses with a pulse length of 1.1-1.3 ps. Under the same conditions, the emittance of the continuous beam is $\varepsilon_{n,x}=\varepsilon_{n,y}=(2.5\pm0.1)\cdot 10^{-12}$ m rad. Furthermore, for both the pulsed and the continuous beam a full width at half maximum energy spread of $0.95\pm0.05$ eV has been measured

Design and characterization of dielectric filled TM110_{110} microwave cavities for ultrafast electron microscopy

Microwave cavities oscillating in the TM$_{110}$ mode can be used as dynamic electron-optical elements inside an electron microscope. By filling the cavity with a dielectric material it becomes more compact and power efficient, facilitating the implementation in an electron microscope. However, the incorporation of the dielectric material makes the manufacturing process more difficult. Presented here are the steps taken to characterize the dielectric material, and to reproducibly fabricate dielectric filled cavities. Also presented are two versions with improved capabilities. The first, called a dual-mode cavity, is designed to support two modes simultaneously. The second has been optimized for low power consumption. With this optimized cavity a magnetic field strength of 2.84 $\pm$ 0.07 mT was generated at an input power of 14.2 $\pm$ 0.2 W. Due to the low input powers and small dimensions, these dielectric cavities are ideal as electron-optical elements for electron microscopy setups

Theory and particle tracking simulations of a resonant radiofrequency deflection cavity in TM110_{110} mode for ultrafast electron microscopy

We present a theoretical description of resonant radiofrequency (RF) deflecting cavities in TM$_{110}$ mode as dynamic optical elements for ultrafast electron microscopy. We first derive the optical transfer matrix of an ideal pillbox cavity and use a Courant-Snyder formalism to calculate the 6D phase space propagation of a Gaussian electron distribution through the cavity. We derive closed, analytic expressions for the increase in transverse emittance and energy spread of the electron distribution. We demonstrate that for the special case of a beam focused in the center of the cavity, the low emittance and low energy spread of a high quality beam can be maintained, which allows high-repetition rate, ultrafast electron microscopy with 100 fs temporal resolution combined with the atomic resolution of a high-end TEM. This is confirmed by charged particle tracking simulations using a realistic cavity geometry, including fringe fields at the cavity entrance and exit apertures

Kappia lobulata (Apocynaceae, Periplocoideae), a new genus from South Africa

Kappia, a new genus from the Fish River Valley in the Eastern Cape Province, South Africa is presented. At first described as Raphionacme lobulata Venter and R.L.Verh. [Venter, H.J.T., Verhoeven, R.L. 1988. Raphionacme lobulata (Periplocaceae), a new species from the eastern Cape Province, South Africa. South African Journal of Botany 54, 603–606.] based on a single specimen collected in 1936, recently discovered plants of this species proved it to be a new genus. In habit Kappia resembles Baseonema Schltr. and Rendle, Batesanthus N.E.Br., Mondia Skeels and Stomatostemma N.E.Br. However, as far as floral structure is concerned, Kappia reveals more affinity with Raphionacme Harv. DNA sequence data show Kappia to be distinct from Batesanthus, Mondia and Raphionacme Harv. and weakly supported as a sister to Stomatostemma

Adverse wind conditions during northward Sahara crossings increase the in-flight mortality of Black-tailed Godwits

Long-distance migratory flights are predicted to be associated with higher mortality rates when individuals encounter adverse weather conditions. However, directly connecting environmental conditions experienced in-flight with the survival of migrants has proven difficult. We studied how the in-flight mortality of 53 satellite-tagged Black-tailed Godwits (Limosa limosa limosa) during 132 crossings of the Sahara Desert, a major geographical barrier along their migration route between The Netherlands and sub-Saharan Africa, is correlated with the experienced wind conditions and departure date during both southward and northward migration. We show that godwits experienced higher wind assistance during southward crossings, which seems to reflect local prevailing trade winds. Critically, we found that fatal northward crossings (15 deaths during 61 crossings) were associated with adverse wind conditions. Wind conditions during migration can thus directly influence vital rates. Changing wind conditions associated with global change may thus profoundly influence the costs of long-distance migration in the future

Migration route, stopping sites, and non-breeding destinations of adult Black-tailed Godwits breeding in southwest Fryslân, The Netherlands

In this paper, we extend our understanding of the migration of Black-tailed Godwits (Limosa limosa limosa) by describing: (1) the orientation and geographic locations of individual migratory routes and (2) the spatial distribution of godwits across seasons and years. We accomplish this using satellite-tracking data from 36 adult godwits breeding in the 200-ha Haanmeer polder in The Netherlands, from 2015 to 2018. During both southward and northward migration, godwits used a narrow migratory corridor along which most individuals made stops within a network of sites, especially the Bay of Biscay, France and Doñana, Spain. Most sites were used consistently by the same individuals across years. However, sites in Morocco were used during northward migration by 75% of individuals, but not revisited by the same individual across years. After southward migration, a small proportion (15%) of godwits spent the entire non-breeding period north of the Sahara, but most (85%) crossed the Sahara and spent at least part of the non-breeding season among seven coastal sites in West Africa and one site in the Inner Niger Delta. Although site-use patterns varied among individuals, individuals showed high site fidelity and were consistent in the number of sites they used from year to year. The considerable differences in the spatial distribution of individuals that breed within a kilometre of one another raise questions about the causes and consequences of individual migratory differences. We discuss that full annual cycle tracking of juveniles from birth to adulthood is needed to understand the source of these individual differences. Our results on the spatial distribution of godwits throughout their annual cycle lay an important foundation of information that can be used to help conserve this declining species

Increasing survival gap between young and elderly gastric cancer patients

INTRODUCTION: This study investigates the treatment and survival of young versus elderly potentially curable gastric cancer patients in the Netherlands. PATIENTS AND METHODS: All noncardia gastric cancer patients with potentially curable gastric cancer according to stage (cTx-3, cNx-3, and cMx-0) diagnosed between 1989 and 2013 were selected from the Netherlands Cancer Registry. Trends in treatment and overall survival were compared between young patients (younger than 70 years) and elderly patients (70 years or older). Multivariable logistic regression analysis was used to examine the probability of patients undergoing surgery and chemotherapy in the most recent period. Multivariable Cox regression analysis was used to identify independent factors associated with survival. RESULTS: In total, 8107 young and 13,814 elderly gastric cancer patients were included. There was a major increase in the proportion of patients treated with resection and chemotherapy after 2004-2008. In young patients the increase was from 2.6% in 1999-2003 to 63% in 2009-2013 (p < 0.01). Also an increase was noticed among elderly patients, from 0.1% to 16% (p < 0.01). Median survival increased from 2004 to 2008 onward particularly in young patients and to a lesser extent in elderly patients (from 28 to 41 months vs from 11 to 13 months). Multivariable Cox regression analyses confirmed that overall survival improved for young and elderly patients. DISCUSSION: Young patients experienced a stronger improvement in survival than elderly patients, resulting in an increasing survival gap. The literature shows this is a problem not only in the Netherlands but also throughout Europe. The dissimilarity in treatment between young and elderly patients could be the reason for this difference

Construction of Special Solutions for Nonintegrable Systems

The Painleve test is very useful to construct not only the Laurent series solutions of systems of nonlinear ordinary differential equations but also the elliptic and trigonometric ones. The standard methods for constructing the elliptic solutions consist of two independent steps: transformation of a nonlinear polynomial differential equation into a nonlinear algebraic system and a search for solutions of the obtained system. It has been demonstrated by the example of the generalized Henon-Heiles system that the use of the Laurent series solutions of the initial differential equation assists to solve the obtained algebraic system. This procedure has been automatized and generalized on some type of multivalued solutions. To find solutions of the initial differential equation in the form of the Laurent or Puiseux series we use the Painleve test. This test can also assist to solve the inverse problem: to find the form of a polynomial potential, which corresponds to the required type of solutions. We consider the five-dimensional gravitational model with a scalar field to demonstrate this.Comment: LaTeX, 14 pages, the paper has been published in the Journal of Nonlinear Mathematical Physics (http://www.sm.luth.se/math/JNMP/

Dual mode microwave deflection cavities for ultrafast electron microscopy

This paper presents the experimental realization of an ultrafast electron microscope operating at a repetition rate of 75 MHz based on a single compact resonant microwave cavity operating in dual mode. This elliptical cavity supports two orthogonal TM$_{110}$ modes with different resonance frequencies that are driven independently. The microwave signals used to drive the two cavity modes are generated from higher harmonics of the same Ti:Sapphire laser oscillator. Therefore the modes are accurately phase-locked, resulting in periodic transverse deflection of electrons described by a Lissajous pattern. By sending the periodically deflected beam through an aperture, ultrashort electron pulses are created at a repetition rate of 75 MHz. Electron pulses with $\tau=(750\pm10)$ fs pulse duration are created with only $(2.4\pm0.1)$ W of microwave input power; with normalized rms emittances of $\epsilon_{n,x}=(2.1\pm0.2)$ pm rad and $\epsilon_{n,y}=(1.3\pm0.2)$ pm rad for a peak current of $I_p=(0.4\pm0.1)$ nA. This corresponds to an rms normalized peak brightness of $B_{np,\textrm{rms}}=(7\pm1)\times10^6$ A/m$^2$ sr V, equal to previous measurements for the continuous beam. In addition, the FWHM energy spread of $\Delta U = (0.90\pm0.05)$ eV is also unaffected by the dual mode cavity. This allows for ultrafast pump-probe experiments at the same spatial resolution of the original TEM in which a 75 MHz Ti:Sapphire oscillator can be used for exciting the sample. Moreover, the dual mode cavity can be used as a streak camera or time-of-flight EELS detector with a dynamic range $>10^4$